AUTOSTAR EMULATOR

An all encompassing kit for AUTOSTAR, AUDIOSTAR, AUTOSTAR II, & AUTOSTAR III  controlled MEADE telescopes.

The ASIIE/ASRCP Wi-Fi kit consists of the following items

1. Wi-Fi Adapter
2. Wi-Fi Adapter Antenna
3. A 3 foot cable (1 m) with a RJ45 Connector on one side and a RJ9 Connector on the other end (hbx port)
4. A 3 foot cable (1 m) with RJ45 connector on one side and an RJ11 connector on the other end (RS232 port)
5. A 3 foot Y-Cable (0.9 m) with RJ45 connector on one side and two connectors on the other end. A RJ11 connector to plug into the RS232  on the handheld controller and female 2.5 mm power connector for the Wi-Fi adapter.
6. A 28 inch ( 0.7 m) Y-Power adapter- One Female 2.5 mm Power Input Connector. Two Male 2.5 mm connectors, one to power the Wi-Fi Adapter and the other to power the telescope.
7. Access to the ASIIE Android App
8. Access to the ASIIE app documentation
9. Access to the ASRCP Android App
10. Access to the ASRCP app documentation
11. Access to the Wi-Fi Adapter installation and configuration documentation

Android Device Requirements:

1. Android Version must be one of the following: 11, 12, 13, 14, 15
2. Device must have a built-in GPS receiver. Getting location from Service Provider will not work.
3. Location Service is enabled while using the ASIIE app.

Mount Requirements:

1. Meade mount utilizes the AUTOSTAR II/III hand controller for the ASIIE application
2. Mount is operational with no issues
3. HBX port is operational for ASIIE:
   1. Some customers have failed HBX ports which renders the ASII hand controller non-operational and the ASIIE app will not work either.
4. RS232 port is operational for ASRCP:
   1. The RS232 port can be on the mount or on the AUTOSTAR Hand Controller.